Valve function |
2x3/2 closed monostable
|
Actuation type |
Electrical
|
Valve size [mm] |
18
|
Normal nominal flow [l/min] |
400
|
Operating pressure [bar] |
2 to 10
|
Construction set up |
Piston pusher
|
Reset mode |
Pneumatic spring
|
Protection category |
IP65, NEMA 4
|
Nominal width [mm] |
5
|
Exhaust function |
Can be throttled
|
Sealing principle |
Soft
|
installation position |
arbitrary
|
Complies to standard |
ISO 15407-1, VDMA 24563
|
Hand assist actuation |
tentative
|
Control type |
pilot operated
|
Control air supply |
Internal
|
Flow direction |
Not reversible
|
Überdeckung |
positive Überdeckung
|
Signal condition display |
LED
|
Flow valve [l/min] |
600
|
Flow valve single connection plate [l/min] |
450
|
Flow valve pneumatically linked [l/min] |
400
|
Shifting time off [ms] |
21
|
Shifting time on [ms] |
13
|
Power-on time |
100 %
|
Coil characteristic value |
24 V AC: 50/60 Hz, pull-in power 3.1 VA, holding power 2.3 VA
|
Permitted voltage oscillations |
-15 % / +10 %
|
Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4]
|
Information about operating and control medium |
Oiled operation possible (required in further operations)
|
Oscillation strength |
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
|
Shock resistance |
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
|
Corrosion resistant class KBK |
0 - No corrosion stressing
|
Medium temperature [°C] |
-5 to 50
|
Relative humidity |
0 - 90 %
|
Sound pressure level [dB(A)] |
85
|
control medium |
Compressed air to ISO 8573-1:2010 [7:4:4]
|
ambient temperature [°C] |
-5 to 50
|
Max. tightening torque Valve fastening [Nm] |
1
|
Product weight [g] |
174
|
Electrical connection |
Wiring diagram Form C acc. to EN 175301-803, acc. to DIN EN 175301-803, without protective earthing conductor
|
Fastening type |
on connection plate
|
Support air control connection 12 |
Connection plate Size 18 mm to ISO 15407-1
|
Support air control connection 14 |
Connection plate Size 18 mm to ISO 15407-1
|
Exhaust control connection 82/84 |
Recorded, Not recorded to standard
|
Pneumatic connection 1 |
Connection plate Size 18 mm to ISO 15407-1
|
Pneumatic connection 2 |
Connection plate Size 18 mm to ISO 15407-1
|
Pneumatic connection 3 |
Connection plate Size 18 mm to ISO 15407-1
|
Pneumatic connection 4 |
Connection plate Size 18 mm to ISO 15407-1
|
Pneumatic connection 5 |
Connection plate Size 18 mm to ISO 15407-1
|
Pre-control interface |
acc. to ISO 15218
|
Material information |
RoHs compliant
|
Seals material |
HNBR, NBR
|
Housing material |
Aluminium die casting
|
Screws material |
Zinc plated steel
|