Item group
Elastomer compensators, PN 10/16
Version:
Flat corrugated, compression-moulded rubber bellows, highly elastic with synthetic fibre pressure carrier (high-temperature version: steel cord) and wire-reinforced rubber flange collar (self-sealing), swivelling steel flanges on both sides
Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)
Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), flange: RSt 37.2 galvanised zinc plated
Temperature range:
Max. +90°C (high temperature version: max. +110°C), from +60°C reduced operating pressures
Operating pressure (standard):
up to +60°C: 16 bar, +80°C: 11 bar,+90°C: 6 bar, bursting pressure: 48 bar (For intermittent loading, the max. operating pressure should be set by 30% lower)
Operating pressure (high temperature version):
up to +60°C: 16 bar, +80°C: 14 bar,+90°C: 12 bar,+100°C: 10 bar,+110°C: 6 bar, bursting pressure: 48 bar (For intermittent loading, the max. operating pressure should be set by 30% lower)
Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!
Optional:
EPDM bellows, high-temperature version (+110°C)-HT, NBR bellows, oil-resistant -B, NBR bellows, oil-resistant, high-temperature version (+110°C)-BHT, butyl bellows (CIIR), for use with drinking water in accordance with KTW recommendation -LE
Documents:
More information
Elastomer compensators, PN 10/16:
20 of 65 articles 
KOMFL 25
Compensator, DN25-PN16 (DIN), EPDM
€651.33
incl. VAT
KOMFL 32
Compensator, DN32-PN16 (DIN), EPDM
€700.16
incl. VAT
KOMFL 40
Compensator, DN40-PN16 (DIN), EPDM
€700.16
incl. VAT
€744.50
incl. VAT
KOMFL 65
Compensator, DN65-PN16 (DIN), EPDM
€851.30
incl. VAT
€899.52
incl. VAT
KOMFL 100
Compensator, DN100-PN16 (DIN/EN), EPDM
€972.90
incl. VAT
KOMFL 125
Compensator, DN125-PN16 (DIN/EN), EPDM
€1,069.71
incl. VAT
KOMFL 150
Compensator, DN150-PN16 (DIN/EN), EPDM
€1,239.73
incl. VAT
KOMFL 175
Compensator, DN175-PN16 (DIN), EPDM
€2,222.28
incl. VAT
deliverable again in ⌀ 3 weeks
KOMFL 200
Compensator, DN200-PN10 (DIN/EN), EPDM
€2,168.74
incl. VAT
KOMFL 250
Compensator, DN250-PN10 (DIN/EN), EPDM
€2,783.72
incl. VAT
KOMFL 300
Compensator, DN300-PN10 (DIN/EN), EPDM
€3,467.36
incl. VAT
€758.11
incl. VAT
€758.11
incl. VAT
€758.11
incl. VAT
€806.34
incl. VAT
€914.24
incl. VAT
€1,039.19
incl. VAT
€1,161.29
incl. VAT
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Payment options: